The equipment production line consists of: 1. A three-stage vibration device for fast feeding and automatic, neat arrangement of materials; high-speed electronic eyes ensure accurate counting. 2. An imported photoelectric sensor for precise cursor recognition; finely ground cutting blades for smooth, burr-free cuts. 3. A sliding-rail cap-dropping mechanism with photoelectric sensor automatically stops caps from sliding when one is present; the cap hanging mechanism is adjustable to accommodate different cap sizes. 4. A high-speed 6-wheel cap-rolling structure; the conveyor belt automatically grips the bottle body, and the 6 wheels at the top automatically tighten the caps from front to back during transport; the tightening tightness is adjustable. 5. An aluminum foil sealing machine can be air-cooled or water-cooled, with a speed of 50-200 per minute, perfectly matching the speed of different production lines. 6. A capping machine is controlled by three servo motors; all parameters can be freely adjusted on the control panel, ensuring neat labeling.
Product Introduction This machine is a single-pressure, automatic rotary, continuous tablet compressing machine that compresses granular raw materials into various tablets. It is mainly used in the pharmaceutical industry for tablet production, and is also suitable for chemical, food, and electronics industries. The outer casing is fully enclosed and made of stainless steel. The internal table surface is also made of stainless steel, and the turntable surface undergoes special treatment to maintain its gloss and prevent contamination, meeting GMP requirements. Transparent glass doors and windows allow clear observation of the tablet compression process and can be fully opened for easy internal cleaning and maintenance. All controllers and operating components are rationally distributed and use a frequency converter for electrical speed regulation, ensuring convenient operation, smooth rotation, and safety. All transmission devices are located inside the machine to maintain cleanliness. An overload protection device automatically stops the machine when pressure is overloaded. This machine is equipped with an electromagnetic brake motor and other safety protection devices, and adjustments and operations can be made during operation.
The dual-color cleaning tablet press is a single-pressure, automatic rotary continuous tablet press developed and manufactured by our factory. It compresses granular raw materials into various common and irregularly shaped tablets. It is mainly suitable for industries such as electronics, food, daily necessities, and pharmaceuticals. The outer casing is fully enclosed, made of stainless steel, and meets GMP standards. It is equipped with a transparent observation window, allowing clear visibility of the machine's operation, and can be fully opened for easy internal cleaning and maintenance. This machine features high pressure, a wide tableting range, and the ability to compress various tablet shapes, including common, irregular, and ring-shaped tablets. It is particularly suitable for multi-variety, small-batch production. The electromechanical system is integrated, with all controllers and adjustment devices concentrated on one side of the machine body for easy operation. It is equipped with a pressure overload protection device to prevent machine damage. The oil-lubricated transmission mechanism is sealed at the bottom of the machine body, extending its service life and preventing cross-contamination.
Product Introduction This machine is a single-pressure, automatic rotary, continuous tablet compressing machine that compresses granular raw materials into tablets in various bags. It is mainly used in the pharmaceutical industry for tablet production, and is also suitable for chemical, food, and electronics industries. The outer casing is fully enclosed and made of stainless steel. The internal table surface is also made of stainless steel, and the turntable surface undergoes special treatment to maintain its gloss and prevent cross-contamination, meeting GMP requirements. Transparent glass doors and windows allow for clear observation of the tablet compression process and can be fully opened for easy internal cleaning and maintenance. All controllers and operating components are rationally arranged and use a frequency converter for electrical speed regulation, ensuring convenient operation, smooth and safe rotation. All transmission devices are located inside the machine to maintain cleanliness. An overload protection device automatically stops the machine in case of pressure overload. This machine is equipped with an electromagnetic brake motor and other safety protection devices, and can be adjusted and operated during operation.
Main Features: 1. The outer casing is fully enclosed and made of stainless steel. The internal worktable is also made of stainless steel, maintaining surface gloss and preventing cross-contamination, complying with GMP standards. 2. A transparent protective cover allows clear visibility of the machine's operation. It can be fully opened for easy cleaning and maintenance. 3. The speed is infinitely variable and can be adjusted arbitrarily. 4. It achieves mechatronics integration, using touch keys and a display screen (speed, output, fault, etc.) for display. 5. The transmission system is enclosed in an oil tank below the machine body, forming separate, independent components that prevent cross-contamination. This also ensures the drive shaft is fully lubricated by immersion in the oil bath, reducing noise and wear. 6. The machine is equipped with a dust extraction device that effectively absorbs dust flying within the pressing chamber.
1. Longer service life: The entire machine body is made of 304 stainless steel, meeting GMP standards. The turntable undergoes special treatment, making it more corrosion-resistant and less prone to rust. 2. Customization supported: Patterns, pressure, turntable, mold material, and feeding methods can be customized according to customer requirements. 3. High production capacity: This equipment operates stably with considerable capacity. Customer tests have shown it can run continuously for 20 hours with very stable operation and almost no deviation in tablet weight. The capacity is approximately 35,000 tablets at a constant speed, and up to 450 million tablets at the fastest speed. 4. Applicable to multiple industries: This equipment is used to compress powdered or granular materials into tablets, and is widely used in the chemical, pharmaceutical, daily chemical, and food industries. 5. Fast delivery: Ample stock available from a reputable factory. Large quantities of stock are available, ensuring fast delivery. Except for customized equipment, standard machines can generally be shipped on the same day.
This machine is a single-pressure, automatic rotary, continuous tablet compressing machine that compresses granular raw materials into various tablets. It is primarily used in the pharmaceutical industry for tablet production, and is also suitable for chemical, food, and electronics industries. The outer casing is fully enclosed and made of stainless steel, as is the internal table surface. The turntable surface undergoes special treatment to maintain its gloss and prevent cross-contamination, meeting GMP requirements. Transparent glass doors and windows allow for clear observation of the tablet compressing process and can be fully opened for easy internal cleaning and maintenance. All controllers and operating components are logically arranged. A variable frequency speed control device is used for electrical speed regulation, ensuring convenient operation, smooth rotation, and safe and accurate operation. All transmission devices are located inside the machine, keeping parts clean. An overload protection device is included, automatically stopping the machine in case of pressure overload.
ZP-31D rotary tablet press introduce is the latest fully enclosed rotary tablet press developed, with a working pressure of 120kn, reasonable structure, simple operation, high productivity, stable and reliable operation, convenient installation and maintenance, beautiful appearance, no dust flying, and low noise. It is the basic equipment for pharmaceutical, chemical, food, electronics, plastics, powder metallurgy and other industrial sectors to press various dry granular raw materials into various round and special-shaped tablets. It is particularly suitable for the production of various batches and multi-variety tablets.
Tablet Press Introduction This machine is a single-press automatic rotating, continuous tablet pressing machine that presses granular raw materials into various tablets. It is mainly used for tablet production in the pharmaceutical industry, and is also suitable for chemical, food, electronics and other industrial sectors. The outer shell is fully enclosed, made of stainless steel, the internal table is made of stainless steel, and the surface of the turntable is specially treated to maintain the surface gloss.
This machine is a single-press automatic rotating, continuous tableting machine that presses granular raw materials into various tablets. It is mainly used for tablet production in the pharmaceutical industry, and is also suitable for chemical, food, electronics and other industrial sectors.
Rotary tablet press is a mechanical equipment that presses granular or powdered materials into solid preparations such as tablets, candies, and health care tablets. It is widely used in pharmaceutical, food, chemical and other industries.